Label Source


Pressure Sensitive Label Adhesives

Permanent Adhesives

S246 - A general purpose rubber based hot melt adhesive featuring high initial tack and ultimate bond strength. Excellent adhesive to corrugated, packaging films, glass, metal & plastic.
Minimum application temperature: above +4O F.
Service temperature: -65 F to +160 F.
Available on high gloss face stock.

B82 - Rubber based hot melt permanent adhesive with good cold temperature characteristics and high ultimate adhesive.
Application temperature: 40 F to 130 F. Service temperature: -50 F to 150 F.
Available on high gloss, matte litho and laminated foil face stocks.

AT1 - An acrylic-based multi-purpose adhesive used for a wide variety of applications under both room and cold temperature conditions. This adhesive may also be need for repositionable purposes depending on the substrate and the length of time needed for repositionability.
Minimum application temperature: -10F. Service Range: -65F to +200F.
Available on high gloss face stock.

643DP - Tackified acrylic permanent adhesive specifically formulated for high speed EDP applications.
Application temperature:
35 F to 150 F. Service temperature: -65 F to 200 F.
Available on smudge proof EDP face stock.

640AT - All temperature acrylic permanent adhesive formulated to perform in both cold and elevated temperature ranges.
Application temperature: -10 F to 150 F. Service temperature: -65 F to 200 F.
Available on laminated foil face stock

P1212 - Acrylic emulsion general purpose permanent adhesive.
Application temperature 40 F to 120 F. Service temperature: -20 F to 140 F. Available on mylar face stacks, clear, white and silver.

Freezer Adhesives

AT330 - Acrylic emulsion freezer grade permanent adhesive showing high initial tack and high ultimate adhesive with excellent permanency at room temperature. Application temperature: -20 F minimum. Service temperature: -65 F to 140F. Available on high gloss face stock.

Removable Adhesives

B92 - Removable with high initial tack and little or no build up of adhesive to substrate. Not generally removable from glass.
Application temperature: 40 F to 160 F Service temperature: -40 F to 200 F.
Available on high gloss and matte litho face stock.

This information is supplied as a general recommendation. All adhesives should be tested under end-use conditions to make sure it meets the requirements of the specific application.


http://www.uniqueprinting.com/adhesive.htm
Copyright, 1999, Unique Printing & Labels, Inc.

1-800-777-5528 info@uniqueprinting.com